1.fix the hand of the embosser and put it on the table steadily
2.adjust the number,1/10 is the small number,1/7 is the big number
3.put the card for compiling number in the card frame
4. set the sample card to confirm the position
5.shift the card from left to right in order to find the right position for emboss
6.the low place of the steel needle is the position showed by the steel mark
7.This picture shows the embossed card
8. this is the sample which shows the fine raised golden code effect
9.there are different kinds of samples
Hangzhou Xuemei Digital Tech Co.,Ltd
Address:shop 22435-22436 8th street ,1st floor gate number 61/62 ,International Trade Mart Yiwu,China
Tel: 0086-0579-81558356
ZIP: 310030
Mobile:18266901568
E-mail: business@hzhongmei.com