SPE-JSGB80-4 combined metal scraper handle

SPE-JSGB80-4 combined metal scraper handle

This scraper adopts unit type combination structure, every 8 cm (length of rubber strip) one unit (height 9 cm, excluding rubber strip), 8 cm unit can be used alone, each set of 4 units,according to the needs can be combined to 16 cm, 24 cm and 32 cm scraper. The use method is the same with the traditional wooden handle and aluminum handle scraper.

1.Simple installation; There is no need to punch and fix the rubber strip, the rubber strip is directly installed on the scraper, just screw the fixing screw and the connecting screw on the scraper, the rubber strip can be firmly fixed on the scraper, and there is no damage to each right angle and pointed angle of the scraper.

2.The front and rear of each unit shall be connected by connecting pieces and fixed with screws. The whole package shall not be bent or deformed after installation.

3. Strong applicability; Suitable for all sizes of pointed and flat head scraper; 50 * 9 mm; 35 * 7 mm; 30*7 mm and other sizes and hardness of the scraper;

4.Each unit weighs 0.23kg (comprising 32cm and weigh 0.9kg), and the pressure created by gravity makes the operation easier and more stable.

5.Economic benefits; Flat head scraping strip can use four right angles; The point rubber strip can use two right angles and a point angle ; Unscrew and remove the strip as needed and reinstall the needed angle.

6.The connection between the configuration screw and the unit is made of stainless steel; Main parts adopt advanced electrostatic spraying surface treatment, long - term use without rust, resistant to cleaning.

7.Both sides of the handle are affixed with sponge strips, making the grip soft and comfortable;

8.Each group is equipped with a 4-cm wide 40 meters long oil-proof adhesive tape , which has a strong viscosity; Paste on the surface of the blade of the scraper to separate the ink and glue, protect the handle and the rubber strip from contamination; After use, remove the tape, the tape will not leave adhesive on the handle and scraper;

9.For the convenience of users, each group will be equipped with 30*7 sharp end scraping strip 1 meter and Install tools.