PE-3XWT280 Precision Micro Adjust Screen Printer

SPE-3XWT280 Precision Micro Adjust Screen Clamp

The machine adopts fine three - directions micro adjust screen printing head;It can be micro adjusted through the knob up and down 170mm , forward and back 20 mm, left and right 20 mm ;

1,Height adjustment: place the screen frame flat on the platform. According to the substrate height or printing requirements, rotate the up and down adjustment handle to reach the appropriate height, and lock the height through the two rear positioning handles.

2,Left and right adjustment: loosen the handle on both sides of the nose, and rotate the handle to move slightly left and right as required; When it is done,tighten both handles.

3,Back and forward adjustment: first, slightly loosen the four red knobs on the front of the chuck, then loosen the fine-tuning knobs on both sides of the front of the chuck and make front and rear fine-tuning as required. After the fine-tuning, tighten the knob and tighten the four red knobs on the top of the chuck.

4,Screen frame chuck width is 280 mm, height is 80 mm, and it can be suitable for the use of a variety of screen frame with the thickness below 50 mm , screen frame chuck installed with three fixed handles , and the dedicated screen frame depression bar, fixed frame stress uniform, fixed frame more firmly.

5,The static balance is adjusted by gravity balance plate when the screen frame is lifted (the machine is equipped with 2 gravity balance plates, which can be installed individually or 2 installed together according to the need of balance). The gravity balance plate can move forward and backward 100mm as required; If the frame weight is too big,heavy object can be added on the top of the balance frame gravity hole.
The lifting angle of the screen frame can be adjusted by screws in the lower part of the balance frame. The height of the screen frame after lifting can be adjusted as required.

6,The main body of the machine adopts advanced electrostatic spraying metal surface treatment, acid and alkali resistance, corrosion resistance, cleaning resistance, no rust, long-term use; Some parts are made of stainless steel.

7,Export to Europe and America standard fumigation-free wooden box packaging, all kinds of metal parts in the box are individually packaged or placed in isolation, to ensure that all kinds of metal parts do not contact directly;

8,Applicable screen frame:
The machine is suitable for screen frame of various materials with inner diameter of 330mm wide, length of 430mm and thickness of 50mm.
The recommended printing area is 280 mm wide and 380 mm long.